This small two car garage in Atlanta, GA had the typical stress cracks in the concrete that we see in garage floors with no expansion joint and maybe a lack of Re-Bar, as in the older houses. These were well established cracks that were opened up with crack chaser blades and filled with the Divot Patch Repair Mortar. A 7” hand grinder was quickly passed over the patches to smooth them out.
All the cracks were pre-primed with a brush just prior to applying the 4195 Direct to Concrete Epoxy to the entire surface. After applying the 4195, a quick back roll was done over the primer to help re-tack the epoxy just prior to dispersing the flake. Approximately 3 hrs later we were able to re-coup the loose flake, scrape the surface, vacuum and blow off the floor getting it ready for the clear coats.
The Fast Drying 5205 Polyaspartic Primer/Sealer was used. It dries in 60 min. Then the 5073 Polyurea High Gloss Top Coat was applied. 2-3 hr dry time. With the use of the 41 Series Accelerators in the 4195 Epoxy Primer we were able to complete the floor with the 2 Clear Top Coats in 1 single Day. Incredible! Apart from the cost savings in labor/time by completing the floor in 1 Day, the customer was able to start putting her belongings back in the garage after only 24 hrs. Basically the next Day.
Thank you Versatile, your 1 day garage installation system has changed the way I run my business. Plus made it more profitable!